Tradie Forms: complete QLD Form 3 while the covered work, stage and inspection details are still clear. Working through it one section at a time captures the property, permit, action notice, stage, inspection arrangements, responsible person, contractor and declaration before downloading the official PDF layout.
QLD Form 3 is the form you do not want to be reconstructing from memory. It deals with covered work, inspection arrangements, the responsible person and a declaration that the work has been completed in conformity with the Plumbing and Drainage Regulation 2019.
This guide is for Queensland plumbers and drainers at the awkward job-site moment where work has been covered before an inspector has inspected it, and local government has allowed the covered work declaration pathway. Use the QLD Form 3 template to prepare the official PDF layout online, or browse QLD plumbing forms for related permit, testing and completion paperwork.
Tradie Forms helps with the paperwork flow. It does not decide whether local government will accept the declaration, whether the declaration is available for this job, or whether the work complies. The responsible person still needs to check the work, the local government process and the finished PDF.
What is QLD Form 3 for?
Business Queensland says some cases allow local government to accept a declaration or report instead of completing an inspection. Its inspection certificate guidance describes Form 3 as the covered work declaration to use if you cover work before an inspector has inspected it and local government has allowed the form to be used to certify the work is compliant.
The official Form 3 PDF says it is used for the purposes of sections 66(2) and 67(2) of the Plumbing and Drainage Regulation 2019. It also says completion of all applicable sections is mandatory.
That makes the form narrow. It is not a general completion certificate. It is not a normal test report. It is not a way to avoid inspection planning. It belongs to the covered work pathway, and only where the local government process allows it.
Why do the details matter?
Covered work is hard to check later because the physical work is no longer visible. If the declaration is thin, everyone downstream has a worse record: local government, the owner, the builder, the plumber, the office and anyone who has to review the job later.
The declaration needs to show which land and permit the declaration relates to, whether an action notice applies, which stage of work is covered, where the covered work is located, what inspection arrangements were agreed, when the work was covered, who the responsible person is, whether contractor details are needed, and the declaration date and signature.
That is why Form 3 is best completed while the job is still live. If the trench has just been covered, the location, date, stage and circumstances are clear. If you wait until Friday afternoon, the details can blur across several jobs.
How specific should the stage and location be?
The official Form 3 lists stages such as water supply pipes under a floor slab, water supply pipes below ground, water supply pipes installed in a building, sanitary drainage under a floor slab, sanitary drainage below ground, sanitary plumbing in a building, treatment plant installation, components of an on-site sewage facility, and other work.
Choose the stage that actually matches the work. If the form is about sanitary drainage below ground, do not tick a broad or convenient option just because it is close. If the job covers more than one stage, be clear about what the declaration covers.
The work description needs to identify the work and the specific location. The official form gives a commercial-property example using grid references. On a smaller job, the same thinking applies: name the side of the dwelling, the trench, the fixture group, the unit, the tenancy, the floor level or the relevant plan reference.
The form does not need a novel. It needs enough detail for the record to mean something later.
Inspection arrangements and action notices
Business Queensland says permit work generally must be inspected before being covered or no more than 5 days after a stage has been reached. It also says inspection certificates are issued after the inspection is complete or after local government receives a covered work declaration as an alternative to an inspection.
Form 3 asks for the time and date of the agreed inspection and the date the work was covered. Do not treat these as minor admin fields. They explain why the declaration exists and how the inspection pathway played out.
If there was an agreed inspection time, record it accurately. If work was covered on a different date, make that clear. Keep photos, site notes, inspection requests, council emails and other job-system entries beside the PDF so the declaration does not sit alone.
The official Form 3 also asks for action notice details if an action notice has been issued under section 66(2)(a) of the Plumbing and Drainage Regulation 2019. If no action notice applies, do not invent one. If it does apply, capture the reference number and date issued, then keep the action notice in the same job record as the finished PDF.
Responsible person, contractor and declaration
The official form says the responsible person is a person licensed to perform the work and who either performs or supervises the performance of the work. That person's details sit at the centre of the declaration.
Capture the full name, occupational licence number, contractor licence number if applicable, phone, email and postal address. If the responsible person is not the contractor for the work, provide the contractor details in the contractor section.
Saved licence and contractor details in Tradie Forms help reduce typing, especially when the same plumber handles several declarations. They are only useful if they are current. Check the licence number and contractor details before download.
The declaration should never be treated as a pre-ticked admin line. The official Form 3 declaration states that the work has been completed in conformity with the Plumbing and Drainage Regulation 2019, that the information is true and accurate, and that the person is the responsible person.
Before signing, ask whether the form covers only work you performed or supervised, whether the stage of work is correct, whether the work location is clear, whether inspection arrangements are recorded accurately, whether any action notice reference is correct, and whether licence and contractor details are current.
Common mistakes with Form 3
Using it without local government allowing the pathway
Form 3 depends on the local government process. Do not assume it applies just because work has been covered.
Giving a vague work location
Under slab may not be enough if the building has multiple zones. Put in a location that can be matched to the job.
Missing the covered date
The date the work was covered is part of the story. It should not be guessed later.
Mixing responsible person and contractor details
If the responsible person is not the contractor, use the contractor section. Do not squeeze the wrong party into the responsible person fields.
No supporting record
Keep photos, inspection requests, action notices, as-constructed details and council correspondence with the PDF. A declaration is much stronger when the surrounding record is easy to find.
How Tradie Forms helps on site
Tradie Forms turns QLD Form 3 into sections you work through one at a time. You can step through property, permit, action notice, stage of work, inspection arrangements, responsible person, contractor and declaration details without fighting the flat PDF on your phone.
The workflow is built for field use: save licence details for repeat jobs, fill the stage and location while the covered work is still clear, catch missing required fields before download, preview the official PDF layout before lodgement, download the finished PDF, and store the declaration with the job record.
Related Queensland plumbing forms include QLD Form 1 for the original permit application, QLD Form 2 for amendments and extensions, QLD Form 5 for testing or commissioning reports, and QLD Form 19 for final inspection certificates used by local government or a public sector entity.
Before the Form 3 PDF leaves the job, check the pack: finished Form 3 PDF, photos before cover-up where available, inspection request record, action notice if one applies, as-constructed sketch or plan reference where useful, permit number and issue date, responsible person licence details, contractor details if different, and a job-system note explaining why the covered work declaration was used.
Next steps
Start the QLD Form 3 covered work declaration when local government has allowed the declaration pathway. If the job needs a permit amendment instead, use QLD Form 2.
For other Queensland plumbing paperwork, browse QLD plumbing forms or the QLD plumbing forms list. For the certificate that closes the permit out, see the QLD Form 19 final inspection guide.. Related start and testing forms include QLD Form 1 and QLD Form 5. The plumbing forms hub has the national set if you work across borders.
Official references
Check the Business Queensland inspection certificates for plumbing and drainage guidance, the official QLD Form 3 PDF, the Business Queensland plumbing and drainage forms and templates page, and the current Plumbing and Drainage Regulation 2019.
