Tradie Forms: complete the SafeWork NSW SW08272 non-friable asbestos clearance certificate on the official PDF layout after the removal area has been visually inspected. Record client, removal work, inspection, visual outcome, declaration, qualifications, signature and date before the area is handed back.
The NSW non-friable asbestos clearance certificate, catalogue SW08272, is a short form with a big job. It records the clearance inspection details after non-friable asbestos removal work where the no air monitoring certificate is the right SafeWork NSW form.
The completion moment is usually practical and immediate. The removal work is done. The area needs to be checked. The client, builder, principal contractor, or property manager wants to know whether the specific area can be reoccupied. The job file needs a PDF that says what was inspected, who inspected it, what was declared, and when.
Use the NSW asbestos clearance certificate template when you want a section-by-section fill, saved client and declarant details, address search, missing-field checks, signature capture, official PDF preview, and a clean PDF download. You can also browse NSW building forms or open the related NSW Class B asbestos removal control plan for the removal planning stage. For the full job file rhythm, see the ARCP and clearance workflow.
What is SW08272 for?
The official SafeWork NSW SW08272 PDF is titled "Non-friable asbestos clearance certificate - no air monitoring". It records client details, removal work details, site address, licensed asbestos removalist details, clearance inspection date and time, visual inspection outcome, whether the area can be reoccupied, whether additional information is attached, and the clearance declaration.
The declaration says the asbestos removal work area and surrounding area are free from visible asbestos, the transit route and waste routes are free from asbestos, and all asbestos in the scope of the removal work has been removed.
SafeWork NSW guidance says a clearance inspection is required at the completion of all licensed asbestos removal work, before reoccupation. For non-friable asbestos removal work, SafeWork NSW says clearance certificates may be issued by either a competent person or an asbestos assessor.
Tradie Forms maps your entries onto the official SW08272 PDF layout. It does not decide whether you are competent, whether this no air monitoring form is the right certificate, whether the area is clear, or whether reoccupation is allowed. The person issuing the certificate remains responsible for the inspection and declaration.
When does this certificate fit?
This template is for the SafeWork NSW no air monitoring clearance certificate for non-friable asbestos.
It is not the Class B removal control plan. Use the NSW Class B ARCP before removal work starts, and the Class B ARCP guide for planning detail.
It is not a friable asbestos clearance certificate. SafeWork NSW says independent asbestos assessors are required for clearance certificates for all friable asbestos removal work before reoccupation. The SW08272 form is the no air monitoring non-friable certificate.
If the job involves friable asbestos, air monitoring, or a clearance requirement outside this form's scope, check SafeWork NSW guidance and use the correct process.
Who can issue the clearance?
SafeWork NSW says for non-friable asbestos removal work, clearance certificates may be issued by either a competent person or an asbestos assessor. SafeWork NSW's asbestos professionals guidance says a competent person is someone with relevant training or experience and specified qualifications for asbestos assessment work.
SafeWork NSW also says the clearance inspection must be independent of the asbestos removal work. The person carrying out the clearance inspection must not be involved in the removal for that specific job or in a business involved in the removal for that specific job, unless a regulator exemption applies.
Do not treat the clearance certificate as a simple admin form. The independence and competency checks are part of the job.
Details to collect before download
Before completing SW08272, collect:
- Client name and contact details
- Date the removal work was carried out
- Site address, including lot or DP if applicable
- Specific asbestos removal work area or areas
- Licensed asbestos removalist name and licence number
- Supervisor name and contact details where different
- Clearance inspection date and time
- Visual inspection outcome
- Whether the area can be reoccupied
- Whether additional information is attached
- Declarant name, ABN, contact number, qualifications, experience, signature, and date
If photos, drawings, plans, or supporting notes are used, store them with the job record and mark the additional information field correctly.
Client and removal work details
The first section records the client and the removal work. Do not let the client details drift between the quote, the job booking, and the certificate.
The client may be the property owner, builder, principal contractor, project manager, or business that engaged the work. Use the correct name and contact details for the clearance record.
The removal work section needs the date of removal, site address, specific work area, licensed removalist details, and supervisor details where applicable.
The declaration later refers to the asbestos removal work area and surrounding area, so the area should be identifiable.
Inspection details and visual outcome
The inspection section records the date and time of the clearance inspection.
The visual inspection section asks whether inspection of the specific area found no visible asbestos remaining as a result of the removal work, whether the area can be reoccupied, and whether additional information has been attached.
SafeWork NSW's code of practice says a clearance certificate should not be issued unless the independent licensed assessor or competent person is satisfied that the asbestos removal area and immediately surrounding area are free from visible asbestos contamination. The code says this is done through a visual inspection for evidence of dust and debris.
Use the form to record the decision, not to make a rough note. If the answer is "No", do not bury the reason. Keep supporting notes with the job record.
The declaration
The declaration is the heart of SW08272. It says:
- The asbestos removal work area and surrounding area are free from visible asbestos
- The transit route and waste routes are free from asbestos
- All asbestos in the scope of the removal work has been removed
The declarant then records name, ABN, contact number, qualifications and experience, signature, and date.
Check this block carefully. If the certificate is being issued by a competent person, the qualifications and experience field should show why that person is the right person to issue it. If an asbestos assessor is issuing it, use their details.
Common SW08272 mistakes
The specific removal area is too vague
The certificate needs to identify what was inspected. If the work area is vague, the clearance is hard to rely on later.
Licensed removalist details are incomplete
The official form asks for the licensed asbestos removalist name and licence number. Do not skip the licence number.
The clearance person is not independent
SafeWork NSW guidance points to independence for clearance inspections. Check this before inspection, not after the form is filled.
Additional information is attached but not stored
If photos, plans, or notes support the clearance, keep them with the PDF. Mark the form consistently.
The wrong certificate is used for friable work
This is the non-friable no air monitoring certificate. If the job involves friable asbestos or air monitoring requirements, check the right SafeWork NSW process.
How Tradie Forms helps
Tradie Forms turns SW08272 into sections you work through one at a time for client, removal work, inspection, visual inspection and declaration.
You can reuse saved client and declarant details, search the site address, catch missing visual inspection answers before download, sign on your device, preview the official PDF layout, and download the completed certificate.
That helps at completion because the clearance record is short but precise. You can finish it while the inspected area, photos, and removal details are still fresh, then attach the PDF to the job record.
Record keeping and completion
Keep the SW08272 PDF with:
- Removal work details
- Class B ARCP where relevant
- SafeWork notification details where relevant
- Photos, drawings, plans, or supporting notes
- Licensed removalist and supervisor details
- Clearance inspection notes
- Client completion record
Before you send the PDF, compare the certificate with the area you inspected. Does the site address match the removal job? Is the specific area narrow enough? Are the removalist licence details complete? Is the visual inspection answer consistent with the declaration? Are qualifications and experience recorded for the person issuing the certificate?
If the form says additional information is attached, make sure the photos, drawings, or notes are actually stored with the PDF. The clearance record should be useful to someone who was not standing there at the time.
Next steps
Start the NSW non-friable asbestos clearance certificate when the removal area is ready for clearance. For the planning stage before removal starts, open the NSW Class B asbestos removal control plan, or browse NSW building forms.
Official references
Check the SafeWork NSW SW08272 PDF, the SafeWork NSW asbestos professionals guidance, the SafeWork NSW asbestos assessor licence guidance, and the SafeWork NSW asbestos removal Code of Practice before relying on this guide.
